How to unlock key ignition code to a Chevy Venture(2000)? - unlock key code for satellite receiver golden interster
My brother has the duplicate key in the ignition and the security code is entered in the truck, and the company will not start.
Wednesday, January 27, 2010
Unlock Key Code For Satellite Receiver Golden Interster How To Unlock Key Ignition Code To A Chevy Venture(2000)?
Subscribe to:
Post Comments (Atom)
2 comments:
placed in the important first contact to start for 10 minutes and again 10 minutes to not work at 30 as against 30 at the start
This works for most GM cars and trucks all
Venture Chevrolet SUV & VANS only a part
Gather all your keyless FOBS for this vehicle.
Remove the ignition key lock cylinder.
Remove the "BCM prgrm" fuse in the fuse box, accessed by opening the passenger door. Use the legend on the fuse box to locate the proper BCMPRGRM "backup.
Close the back door.
Log in and close all doors.
Insert the key in the ignition, and turn the ignition lock cylinder to the ACC (with a click on you - an opposite direction to start the engine).
Turn the ignition lock cylinder, then back to ACC within 1 second.
Opening and closing vehicle door. A bell sounds when the system goes into programming mode.
Press and hold the channel lock and unlock for about 14 seconds. IMPORTANT: After listening to 7 seconds a chime confirming successful synchronization. It is necessary to wait about 14 seconds for a second chime that will confirm the success of the programnition switch to ON.
8. Turn the ignition key to the OFF position.
9. Release the unlock button on the power panel door. The vehicle locks and unlocks the doors automatically.
10. Press and hold the lock and unlock the channel at the same time that the door to lock and unlock. This step may take up to 30 seconds.
11. Repeat the previous step for each additional transmitter (including the existing channels).
Post a Comment